Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 2.0.0-RELEASE #1: Sat Jul 19 14:34:49 PDT 2008
    root@test12.backplane.com:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1462964393 Hz, i8254 clock: 1193153 Hz
CPU: Intel(R) Celeron(R) M CPU        410  @ 1.46GHz (1463.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6e8  Stepping = 8
  Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0xc109<SSE3,MON,TM2,XTPR,RSVD15>
real memory  = 528285696 (515904K bytes)
avail memory = 499666944 (487956K bytes)
Preloaded elf kernel "/kernel" at 0xc079b000.
Preloaded elf module "/modules/acpi.ko" at 0xc079b300.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
ACPI: RSDP @ 0x0xf7c30/0x0024 (v  2 HP    )
ACPI: XSDT @ 0x0x1f7e57c4/0x0074 (v  1 HPQOEM SLIC-MPC 0x00000001 HP   0x00000001)
ACPI: FACP @ 0x0x1f7e5684/0x00F4 (v  4 HP     30AA     0x00000003 HP   0x00000001)
ACPI: DSDT @ 0x0x1f7e5ac0/0xFBEB (v  1 HP       nc6340 0x00010000 MSFT 0x0100000E)
ACPI: FACS @ 0x0x1f7f7e80/0x0040
ACPI: SLIC @ 0x0x1f7e5838/0x0176 (v  1 HPQOEM SLIC-MPC 0x00000001 HP   0x00000001)
ACPI: HPET @ 0x0x1f7e59b0/0x0038 (v  1 HP     30AA     0x00000001 HP   0x00000001)
ACPI: APIC @ 0x0x1f7e59e8/0x0068 (v  1 HP     30AA     0x00000001 HP   0x00000001)
ACPI: MCFG @ 0x0x1f7e5a50/0x003C (v  1 HP     30AA     0x00000001 HP   0x00000001)
ACPI: TCPA @ 0x0x1f7e5a8c/0x0032 (v  2 HP     30AA     0x00000001 HP   0x00000001)
ACPI: SSDT @ 0x0x1f7f56ab/0x032A (v  1 HP       HPQPAT 0x00000001 MSFT 0x0100000E)
ACPI: SSDT @ 0x0x1f7f59d5/0x04CB (v  1 HP      Cpu0Cst 0x00003001 INTL 0x20050624)
ACPI: SSDT @ 0x0x1f7f5ea0/0x025F (v  1 HP      Cpu0Tst 0x00003000 INTL 0x20050624)
ACPI: SSDT @ 0x0x1f7f60ff/0x04D7 (v  1 HP        CpuPm 0x00003000 INTL 0x20050624)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x66,0x62 on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (256.0C)
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_tz3: <Thermal Zone> on acpi0
acpi_tz4: <Thermal Zone> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
isab0: <ACPI Generic ISA bridge> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
system power profile changed to 'economy'
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> port 0x6000-0x6007 mem 0xe8480000-0xe84bffff,0xd0000000-0xdfffffff,0xe8400000-0xe847ffff irq 10 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <unknown card> (vendor=0x8086, dev=0x27a6) at 2.1
pci0: <unknown card> (vendor=0x8086, dev=0x27d8) at 27.0 irq 10
pcib1: <PCI to PCI bridge (vendor=8086 device=27d0)> irq 10 at device 28.0 on pci0
pcib1: Disable PCI Express hot-plug interrupts(0x0009)
pci8: <PCI bus> on pcib1
pci8: <unknown card> (vendor=0x14e4, dev=0x4311) at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=27d4)> irq 11 at device 28.2 on pci0
pcib2: Disable PCI Express hot-plug interrupts(0x0009)
pci24: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=8086 device=27d6)> irq 10 at device 28.3 on pci0
pcib3: Disable PCI Express hot-plug interrupts(0x0009)
pci32: <PCI bus> on pcib3
uhci0: <UHCI (generic) USB controller> port 0x6020-0x603f irq 10 at device 29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x6040-0x605f irq 11 at device 29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x6060-0x607f irq 11 at device 29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x6080-0x609f irq 10 at device 29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 10
pcib4: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib4
cbb0: <PCI-CardBus Bridge> mem 0xe8100000-0xe8100fff irq 10 at device 6.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: vendor=104c, dev=803a
fwohci0: <1394 Open Host Controller Interface> mem 0xe8104000-0xe8107fff,0xe8101000-0xe81017ff irq 10 at device 6.1 on pci2
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:02:3f:99:29:91:47:0c
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 02:02:3f:91:47:0c
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=2, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xe8108000-0xe8109fff irq 11 at device 14.0 on pci2
miibus0: <MII bus> on bfe0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: MAC address: 00:17:08:3e:ad:bf
isab1: <PCI to ISA bridge (vendor=8086 device=27b9)> at device 31.0 on pci0
isa0: <ISA bus> on isab1
atapci0: <Intel ICH7M SATA300 controller> port 0x60a0-0x60af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 11 at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ad0: 38166MB <HTS541040G9SA00 MB2OC60P> at ata0-master SATA150
ata1: <ATA channel 1> on atapci0
acd0: CDRW <PHILIPS CD-RW/DVD-ROM SCB5265/TH16> at ata1-master PIO4
orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
Mounting root from ufs:/dev/ad0s3a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PHILIPS CDRW/DVD SCB5265 TH16> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
acpi_tz0: _CRT value is absurd, ignored (256.0C)